Omron FZ3 Series, Руководство пользователя

Страница: 130 / 304

6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
128 Communicating through Serial Communication (PLC Link) FZ3 User's Manual
Timeout [s]
1 to 120
[5] Set the time in which a timeout error will occur in
seconds.
[Note 1]: If a speed of [38400 bps] or higher is selected, effective communication cannot be
guaranteed depending on the cable length because speeds of over 20 kbps are not defined in
RS-232C standards.In these cases, set the communication speed at [19200 bps] or lower.
3.
Tap [PLC Link].
The PLC Link Setting window is displayed.
4.
Set the following items.
Setting item
Set value
[Factory default]
Description
Command area
Area
●
[CIO Area(CIO)]
●
Work Area(WR)
●
Holding Bit Area(HR)
●
Auxiliary Bit Area(AR)
●
DM Area (DM)
●
EM Area(EMO)
Set the communication
area.
Address
0 to 99999
[0] Set the communication
address.
Response area
Area
●
[CIO Area(CIO)]
●
Work Area(WR)
●
Holding Bit Area(HR)
●
Auxiliary Bit Area(AR)
●
DM Area (DM)
●
EM Area(EMO)
Set the communication
area.
Acesst 1.0 6251194