Omron FZ3 Series, Руководство пользователя

Страница: 110 / 304

5
Changing
the
System
Environment
108 Setting Conditions Related to Operation during Measurement FZ3 User's Manual
Setting Conditions Related to Operation
during Measurement
With operation during measurement, the following items can be changed.
●
Operation when the next STEP signal is input during measurement
●
Saving of scene groups during scene group switching
1.
On the Main screen, tap the [Measure] menu - [Measure setting].
The Measurement Setting window is displayed.
2.
Set each item as required.
When they are not displayed, create settings through the [System] menu - [Controller] - [Create
shortcut].
Item
Set value
[Factory default]
Description
STEP in measure
●
[ERROR ON]
●
ERROR OFF
Sets whether the ERROR signal output turns on
when the following STEP signals are input during
measurement.
Save scene group on
scene switch
●
[Checked]
●
Unchecked
Sets operation when scene group switching is
performed.Sets whether the scene group is saved
when it is switched.The scene group switching time
can be reduced if the check is removed, but if the
power is turned off without saving when settings
have been changed, the changed contents will be
cleared.
Scene switch time
Add time [ms] 0 to 1000
[10]
The BUSY signal is turned on during scene
switching.When this time is short and the change
from ON to OFF cannot be detected by external
devices, the BUSY signal ON time can be
added.This is set in 1 ms units.The displayed value
can be changed in 5 ms increments by tapping "<"
and ">".
Acesst 1.0 6251194