Omron FZ3 Series, Руководство пользователя

Страница: 214 / 304

7
External
Reference
Tables
212 Measurement FZ3 User's Manual
137 Lower limit of the maximum edge position X Set/Get -99999.9999 to 99999.9999
138 Upper limit of the maximum edge position Y Set/Get -99999.9999 to 99999.9999
139 Lower limit of the maximum edge position Y Set/Get -99999.9999 to 99999.9999
140 Upper limit of the minimum edge position X Set/Get -99999.9999 to 99999.9999
141 Lower limit of the minimum edge position X Set/Get -99999.9999 to 99999.9999
142 Upper limit of the minimum edge position Y Set/Get -99999.9999 to 99999.9999
143 Lower limit of the minimum edge position Y Set/Get -99999.9999 to 99999.9999
144 Upper limit of the edge position X Ave. Set/Get -99999.9999 to 99999.9999
145 Lower limit of the edge position X Ave. Set/Get -99999.9999 to 99999.9999
146 Upper limit of the edge position Y Ave. Set/Get -99999.9999 to 99999.9999
147 Lower limit of the edge position Y Ave. Set/Get -99999.9999 to 99999.9999
148 Upper limit of the long distance Max. Set/Get 0 to dist (X_MAX, Y_MAX)
149 Lower limit of the long distance Max. Set/Get 0 to dist (X_MAX, Y_MAX)
150 Upper limit of the short distance Max. Set/Get 0 to dist (X_MAX, Y_MAX)
151 Lower limit of the short distance Max. Set/Get 0 to dist (X_MAX, Y_MAX)
152 Upper limit of the deviation Set/Get 0 to dist (X_MAX, Y_MAX)
153 Lower limit of the deviation Set/Get 0 to dist (X_MAX, Y_MAX)
154 Upper limit of the angle Set/Get -180 to 180
155 Lower limit of the angle Set/Get -180 to 180
156 Upper limit of the lost point Set/Get 0 to 100
157 Lower limit of the lost point Set/Get 0 to 100
158 Monochrome edge detection mode Set/Get
0: Light
→
Dark
1: Dark
→
Light
159 Edge level absolute value Set/Get 0 to 442
160 Edge level specification method Set/Get
0 : %
1: Absolute value
162 Scan lines Set/Get 1 to 100
163 Scan width Set/Get 1 to 200
164 Display area Set/Get 0 to 99
165 Noise cancel Set/Get
0: OFF
1: ON
166 Measure type Set/Get 0: Projection, 1: Derivation
167 Area division method Set/Get
0: Do not fix number of area divisions
1: Fix the number of area divisions
* dist (X_MAX,Y_MAX) = sqrt (X_MAX*X_MAX+Y_MAX*Y_MAX)
Scan Edge Width
No. Data name Set/Get Data range
0 Judge Get only
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
1 Edge width Max. Get only 0 to dist (X_MAX, Y_MAX)
2 Edge width Min. Get only 0 to dist (X_MAX, Y_MAX)
3 Edge width Ave. Get only 0 to dist (X_MAX, Y_MAX)
4 Lostwidth Get only 0 to 100
Acesst 1.0 6251194