Omron 3G3MV-PDRT2, Руководство пользователя

Страница: 353 / 363

Chapter 10
10-95
Appendices
Note 3. The default setting of the Inverter will differ depending on its capacity. (The value for the 200-
V-class 0.4-kW Inverter is given above.)
Note 4. When the control mode is changed, the Inverter will revert to the setting range. (The open
loop vector control setting range is given above.)
■
Reference Parameters
Con-
stant
Regis-
ter num-
ber
(hex)
Class 64 (hex) Name Setting
range
Setting
unit
Default
setting
Write
during
opera-
tion
In-
stance
At-
tribute
d1-01 0280 01 43 Frequency reference 1 0.00 to
max. fre-
quency 0.01 Hz
(Set
using o1-
03.) 6.00 Yes
d1-02 0281 01 44 Frequency reference 2 0.00 Yes
d1-03 0282 01 45 Frequency reference 3 0.00 Yes
d1-04 0283 01 46 Frequency reference 4 0.00 Yes
d1-05 0284 01 47 Frequency reference 5 0.00 Yes
d1-06 0285 01 48 Frequency reference 6 0.00 Yes
d1-07 0286 01 49 Frequency reference 7 0.00 Yes
d1-08 0287 01 4A Frequency reference 8 0.00 Yes
d1-09 0288 01 4B Jog frequency reference 6.00 Yes
d2-01 0289 01 4C Reference frequency upper limit 0.0 to
110.0 0.1% 100.0 No
d2-02 028A 01 4D Reference frequency lower limit 0.0 to
109.0 0.1% 0.0 No
d3-01 028B 01 4E Jump frequency 1 0.0 to
400.0 0.1 Hz 0.0 No
d3-02 028C 01 4F Jump frequency 2 0.0 No
d3-03 028D 01 50 Jump frequency 3 0.0 No
d3-04 028E 01 51 Jump frequency width 0.0 to
20.0 0.1 Hz 1.0 No
d4-01 028F 01 52 Reference frequency hold function
selection 0, 1 1 0 No
d4-02 0290 01 53 Trim control level 0 to 100 1% 25 No
d5-01 0291 01 54 Torque control selection 0, 1 1 0 No
d5-02 0292 01 55 Torque reference delay time 0 to 1000 1 ms 0 No
d5-03 0293 01 56 Speed limit selection 1, 2 1 1 No
d5-04 0294 01 57 Speed limit
−
120 to
120
1% 0 No
d5-05 0295 01 58 Speed limit bias 0 to 120 1% 10 No
d5-06 0296 01 59 Speed/torque control switching timer. 0 to 1000 1 ms 0 No