Omron 3G3MV-PDRT2, Руководство пользователя

Страница: 334 / 363

Chapter 10
10-76
Appendices
Note 1. When the control mode is changed, the Inverter will revert to default settings. (The V/f control
default setting is given above.)
Note 2. The setting range depends on the capacity of the Inverter.
Note 3. These parameters can be monitored or set only when F is set for C6-02.
■ Reference Parameters
C4-01 0215 02 15 Torque compensation gain 0.00 to
2.50 0.01 1.00 Yes
C4-02 0216 02 16 Torque compensation pri-
mary delay time constant 0 to
10,000 1 ms 200
(See
note 1.) No
C6-02 0224 02 24 Carrier frequency selection 1 to F 1 De-
pends
on ca-
pacity. No
C6-03 0225 02 25 Carrier frequency upper
limit 2.0 to
15.0
(See
notes 2
and 3.) 0.1 kHz De-
pends
on ca-
pacity. No
C6-04 0226 02 26 Carrier frequency lower limit 0.4 to
15.0
(See
notes 2
and 3.)
0.1 kHz De-
pends
on ca-
pacity. No
C6-05 0227 02 27 Carrier frequency propor-
tional gain 00 to 99
(See
note 3.) 1 00 No
Param-
eter
Register
No.
(Hex)
Class 64 (Hex) Name Setting
range
Setting
unit
Default
setting
Changes
during
opera-
tion
In-
stance
At-
tribute
d1-01 0280 02 80 Frequency reference 1 0 to
max.
output
fre-
quency 0.01 Hz
(Set
with o1-
03.) 0.00 Yes
d1-02 0281 02 81 Frequency reference 2 0.00 Yes
d1-03 0282 02 82 Frequency reference 3 0.00 Yes
d1-04 0283 02 83 Frequency reference 4 0.00 Yes
d1-17 0292 02 92 Jog frequency reference 6.00 Yes
d2-01 0289 02 89 Frequency reference upper
limit 0.0 to
110.0 0.1% 100.0 No
d2-02 028A 02 8A Frequency reference lower
limit 0.0 to
110.0 0.1% 0.0 No
d2-03 0293 02 93 Master speed reference
lower limit 0.0 to
110.0 0.1% 0.0 No
Param-
eter
Register
No.
(Hex)
Class 64 (Hex) Name Setting
range
Setting
unit
Default
setting
Changes
during
opera-
tion
In-
stance
At-
tribute