Omron 3G3MV-PDRT2, Руководство пользователя

Страница: 128 / 363

Chapter 5
5-34
Remote I/O Functions
● Inputs (Inverter to PLC) Instance ID: 152 Decimal (98 Hex)
Note 1. A shaded box indicates that the bit is not used.
Note 2. Control remote I/O inputs and outputs are paired. When using control remote I/O, be sure
to set them together.
Note 3. Control remote I/O objects do not conform to the AC/DC drive profile, but are specially set
for this product.
Wd n+1 Right-
most 2 Frequency reference, rightmost byte
Left-
most 3 Frequency reference, leftmost byte
Wd n+2 Right-
most 4 Torque reference/torque limit, rightmost byte
Left-
most 5 Torque reference/torque limit, leftmost byte
Wd n+3 Right-
most 6 Torque compensation bias, rightmost byte
Left-
most 7 Torque compensation bias, leftmost byte
Byte number Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Wd m Right-
most 0 Fault Alarm
(minor
fault) Inverter
ready At refer-
ence During
reset
input During
reverse
run Zero
speed During
run
Left-
most 1 P
lock/com
pletion
(See
note 4.) Multi-
function
output 2 Multi-
function
output 1 Multi-
function
contact
output Local/re
mote UV
detected Opera-
tion fault
Wd m+1 Right-
most 2 Output frequency monitor, rightmost byte
Left-
most 3 Output frequency monitor, leftmost byte
Wd m+2 Right-
most 4 Torque reference monitor, rightmost byte
Left-
most 5 Torque reference monitor, leftmost byte
Wd m+3 Right-
most 6 Output current monitor, rightmost byte
Left-
most 7 Output current monitor, leftmost byte
Wd m+4 Right-
most 0 Con-
nected
compo-
nent
mainte-
nance
flag Opera-
tion time
over flag Warning
torque
detected
flag Cooling
fan/elec-
trolytic
capaci-
tor main-
tenance
flag Inverter
unit
mainte-
nance
flag Network
power
voltage
drop flag
Left-
most 1 Error flag Inverter detected fault code
Byte number Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0