Date
26/6/2017
Document 923860006_09_006
Document code 923860006_09_006
Page 42 from 44
5.2.2 Zone programming information
In this screen you can see how each zone has been programmed to operate. The current limit column displays the
current that has been measured during the CURRENT MEASUREMENT in the initial installation.
5.2.3 Zones status information
5.2.4 Information Point
Choose zone by clicking the links above (1, 2, 3, 4, 5, 6, 7, 8). By clicking any zone, all 32 addresses in
that specific zone are shown below.
First column indicates address (point number). Second indicates by YES/NO if a luminary is installed in
the specific address. Third column indicates point name. Fourth column indicates mode of function
(maintained – non maintained). Fifth column indicates luminary type. Sixth column indicates if there is
any fault at that point. Seventh column indicates communication status and last column the lamp status.
