Date
26/6/2017
Document 923860006_09_006
Document code 923860006_09_006
Page 21 from 44
By selecting ANNUAL CHECK WARNING and pressing “Enter” you see the
screen on the right. With the “Up/Down” keys select NO or YES and press
“Enter”. If you select YES, then every year you will be getting a reminding
message about the Annual inspection.
By selecting STAIRCASE TIME and pressing “Enter” you can see the screen
on the right. With the “Up/Down” keys you can select the required minutes
that the staircase light will remain on and then press “Enter”. The default
value is 3 minutes. (min 1’, max 30’)
By selecting BATTERY COOLER and pressing “Enter” you can see the
screen on the right. With the “Up/Down” keys you select NO or YES and then
press “Enter”. The option YES
must only
be selected if a cooling fan has
been installed. Deactivated by default.
The MANUFACTURER MENU does not contain any option that can be
adjusted by the installer.
4.1.7 Clearing Events
By selecting CLEAR EVENTS in the TECHNICIAN MENU and pressing
“Enter” you can see the screen on the right. The system requests a
confirmation. If you actually need to clear the events, then with the down key
select YES and then press “Enter”. Clearing of event must be done after the
initial installation has finished.
4.1.8 Change Code
By selecting CHANGE CODE and pressing “Enter” you can see the screen
on the right. Using the “Up/Down” and “Right/Left” keys enter the desired
4digit code and press “Enter”. The new code is the one to be used for
programming the system from PC also. Changing the technician code is an
action that must be responsibly done. In case of a code loss, there is no way
to reset the code to the previous one without knowing the current code.
