Date
26/6/2017
Document 923860006_09_006
Document code 923860006_09_006
Page 19 from 44
Select the start time of the Timer (this is the hour that the luminaries will be
turned ON). With the “Up/Down” keys you can change the digit value and
with the “Right” key you select the next digit. To store the time, press the
right key past the last digit.
Select the start week day of the timer. With the selection EVERY DAY the
timer will repeat daily. There are also available WEEKEND and WEEK DAY
options.
Select the stop time of the Timer (this is the hour that the luminaries will be
turned OFF). With the “Up/Down” keys you change the digit value and with
the “Right” key you select next digit. Enter the required time. To store the
time, press the right key past the last digit.
Select the end day of the timer. If you have previously selected EVERY DAY
or WEEKEND or WEEK DAY, then this screen will not be shown.
4.1.6 System Settings
By selecting SETTINGS and then pressing “Enter” the screen on the right is
shown. The SETTINGS menu includes some additional options that can
become visible by scrolling down the menu with the “down” key. These are
SELECT LANGUAGE, ANNUAL CHECK WARNING, STAIRCASE TIME,
BATTERY COOLER and MENU MANUFACTURER.
By selecting BATTERY CAPACITY and pressing “Enter” you see the next
screen. The batteries that can be used are 33Ah or 55Ah depending on the
model. Using the up/down keys select the required capacity and press
“Enter”.
