Date
26/6/2017
Document 923860006_09_006
Document code 923860006_09_006
Page 20 from 44
By selecting SYSTEM AUTONOMY and pressing “Enter” you see the next
screen. Using the up/down keys you can select one of the five options
available. Press “Enter” when finished.
With this selection you do not
actually change the autonomous duration of the panel
. You only inform
the system of the required emergency duration so it can use it in future
autonomous duration test.
The actual duration must be calculated before
the installation by calculating the consumption of the luminaries in
emergency operation and selecting the appropriate batteries
. The
calculated duration must be equal to or greater than the required.
By selecting the BUTTON INHIBIT and pressing “Enter” you can see the next
screen. There you can set whether the INHIBIT key is functional or not. The
function of the INHIBIT key can be seen in par. 3. Sometimes for safety
reasons it is required that the INHIBIT key is not functional. In this case
select NO and press “Enter”. By default, BUTTON INHIBIT is set to YES.
With the next 3 functions you can modify the date and hour. This must be
done during the installation to enable all logged events to have the correct
time and date stamp. It’s also crucial for the timers to operate in the correct
time.
By selecting the DAY OF WEEK SETTING and pressing “Enter” you can see
the following screen on the right. Select the current day of the week using the
“Up/Down” keys and press “Enter”.
By selecting DATE SETTING and pressing “Enter” you see the screen on the
right. With the “Up/Down” keys you can change the value of each digit. With
the “Right” key you can select next digit. Select the correct date and press
“Enter”.
Note that date format is day/month/year.
By selecting TIME SETTING and pressing “Enter” you can see the screen on
the right. With the “Up/Down” keys you can change the value of each digit.
With the “Right” key you can select next digit. To store the time, press the
right key past the last digit.
By selecting SELECT LANGUAGE and pressing “Enter” you can see the
screen on the right. With the “Up/Down keys” select between Greek, English
or Norge and then press “Enter”. When changed, all logged events use the
new language.
