ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 98 / 113

EX Series Operating Manual
*RCL {1|2|3|4|5|6|7|8|10}
This command is recalling the power supply's saved data in the non-volatile memory
You can select among 1 ~ 10 number.
> 1 ~ 10 Memory sector.
ex) *rcl 2 Recall and apply the number 2 memory data to the power supply.
*CLS
Clear the all error event.
ex) *CLS
*RST
This command is initializing of the power supply. Following is initializing contents.
This command is initializing of the power supply. Following is initializing contents.
> Output OFF
> Voltage Limit 0V
> Current Limit Maximum current value of the power supply.
> OVP Maximum OVP value of the power supply.
> OCP Maximum OCP value of the power supply.
> UVL 0V
> OVL Voltage Limit MAX value.
> UCL 0A
> OCL Current Limit MAX value.
> Volt:Step Minumum value of setting
> Curr:Step Minumum value of setting
> Key Lock OFF
> Factory Mode Keep the value of before reset y p
> Trip상태 Clear if the OVP or OCP Tripped occurred automatically.
ex) *RST Initialize the power supply.
- 98 -