ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 47 / 113

EX Series Operating Manual
3-11. Limit Display
Shows voltage and current limit values on the display and allows knob adjustment for setting
limit values. When you press the "Limit Display" key, LMT Lamp is turned on. If it is dark, the
power supply is under the readback display or output off state.
Next is setting procedure about limit display.
* Display limit at the "Output OFF" mode.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌In other to see the limit of voltage and current, press the "Limit Display" key.
▌LMT Lamp is turned on and appear readback voltage and current.
LCD Display 00.00V 88.00A
▌By using encoder knob, you can set the voltage or current.
▌After finished to set, press the "Limit Display" key. And return to previous
state.
LCD Display
**output off**
* Display limit at the "Output ON" mode.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌In other to see the output of voltage and current,
press the "Output On/Off" key.
LCD Display 00.00V 00.00A
▌In other to see the limit of voltage and current, press the "Limit Display" key. ▌ g , p p y y
▌LMT Lamp is turned on and appear readback voltage and current.
LCD Display 00.00V 88.00A
▌By using encoder knob, you can set the voltage or current.
▌After finished to set, press the "Limit Display" key. And return to
previous state.
LCD Display
10.00V 00.00A
This display is for setting 10V
- 47 -