ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 94 / 113

EX Series Operating Manual
FACT:LAST-STA {DIS|SAF|FUL}
When you turn on the power supply, you can select the default state of output DC power.
> DIS When selected this mode, boot the power supply to original default value.
> SAF When you turn on the power supply, appears "OUTPUT OFF" display.
But if you press the "OUTPUT" key, recall the last state voltage/current
value.
> FUL Recall the state before you turn off fully.
ex) fact:last-sta saf Set the safetymode.
FACT:LAST-STA?
Confirm the Last-state value.
Return value "DISABLE"
"SAFETY"
"SAFETY"
"FULLY"
ex)fact:last-sta? return value "SAFETY"
FACT:AUTO-CUR {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period
of time, the power supply's cursor location go down to minimum changing unit automatically
, p pp y g g g y
when you set the "AUTO CURSOR MV" mode is enable.
> DIS Disable "AUTO CURSOR MV" mode.
> ENA Enable "AUTO CURSOR MV" mode.
ex) fact:auto-cur ena Disable "AUTO CURSOR MV" mode.
FACT:AUTO-CUR?
Confirm the auto cursor value
Confirm the auto cursor value.
Return value "0" Disable state
"1" Enable state
ex)fact:auto-cur? return value "1"
FACT:AUTO-LOC {DIS|ENA}
If the power supply doesn't receive any operation by using front-panel within a certain period
If the power supply doesn t receive any operation by using front panel within a certain period
of time, the power supply becomes the key lock state automatically when you set the
"AUTO KEY LOCK" mode is enable.
> DIS Disable "AUTO KEY LOCK" mode.
> ENA Enable "AUTO KEY LOCK" mode.
ex) fact:auto-loc ena Set the auto lock function.
FACT:AUTO-LOC?
Confirm auto key lock value.
Return value "0" Disable state
"1"
Enable state
ex)fact:auto-loc? return value "1"
- 94 -