ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 75 / 113

EX Series Operating Manual
6-3. User-Mem Clear.
▌This mode is to initialize the 10 datas of OVP, OCP, UVL and etc in the non-volatile memory
at once.
▌After initialized the datas of non-volatile, initialized data never be recovered.
▌Initialized contents.
>Voltage 0V
>Current Limit maximum value.
>OVP-Level OVP setting maximum value.
>OCP-Level OCP setting maximum value.
>UVL-Level 0V
>OVL-Level Limit maximum value.
>UCL-Level 0A
>OCL-Level Limit maximum value.
>Output Mode OFF
User-Memory Clear Operating
▌Power switch on in a pressing "FACTORY" key.
In a pressing
▌Power switch ON
▌When appearing "1. user-mem clear" message, release "FACTORY" key.
Release
In a pressing
▌In other to initialize non-volatile memory datas, press the "FACTORY"
key one more time.
LCD Display done
≫ R l t d R t I t f C d ≫ Related Remote Interface Command
FACT:USER-CLE
Apply: FACT:USER-CLE Initialize non-volatile memory data.
- 75 -