ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 63 / 113

EX Series Operating Manual
Parallel Master/Slave setting
The factory default is set as master. In other to change to slave, refer to following setting
method
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode. After turned on, check the power supply displays
OUTPUT OFF
Mode.
▌Press the limit display key and hold 3 seconds.
LCD Display
1. V PROG
▌Press the cursor key to move to "PARALLEL".
LCD Di l 4 PARALLEL LCD Display 4. PARALLEL
▌In other to change master or slave, press limit display key.
LCD Display
MASTER
▌Press the cursor keys to change to slave.
LCD Display
SLAVE
▌In other to apply and store the mode changes, press the limit display key.
LCD Display
SAVED
▌When you turn on the power next time, start with your current settings.
≫ Related Remote Interface Command
REM:PAR {MAST|SLAV}
REM:PAR?
Application : REM:PAR? Return Value : "MAST"
REM:PAR SLAV Slave Power Supply로 설정 REM PAR SLAV Slave Power Supply로 설정
- 63 -