ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 101 / 113

EX Series Operating Manual
8-4. Calibration Error
If you do calibration, the power supply also do calibration of readcack.
The following errors indicate failures that may occur during a calibration.
-74, "ADC-V low limit over"
It apprars when calibration of voltage ADC low section is out of range It apprars when calibration of voltage ADC low section is out of range
-75, "ADC-V high limit over"
It apprars when calibration of voltage ADC high section is out of range.
-76, "ADC-A low limit over"
It apprars when calibration of current ADC low section is out of range.
-77, "ADC-A high limit over" 77, ADC A high limit over
It apprars when calibration of current ADC high section is out of range.
8-5. Nonvolatile Memory Check Error.
Before shipping the power supply, register the properties in the non-volatile memory.
If check the properties and occur the error, it appears the error.
-80, "Memory limit volt error"
It means the error of setting available voltage value.
-81, "Memory limit curr error"
It means the error of setting available current value.
-82, "Memory max volt error"
It means the error of the power supply's maximum voltage value. p pp y g
-83, "Memory max curr error"
It means the error of the power supply's maximum current value.
-84, "Memory volt decimal error"
It means the error of the power supply's point expression of voltage.
-85, "Memory curr decimal error"
It means the error of the power supply's point expression of current It means the error of the power supply's point expression of current.
-86, "Memory volt length error"
It means the error of the power supply's digit length of voltage.
-87, "Memory curr length error"
It means the error of the power supply's digit lengt of current.
-88, "Not match volt length and limit" 88, Not match volt length and limit
It means the error of no match between the power supply's setting available voltage value
and digit length.
-89, "Not match curr length and limit"
It means the error of no match between the power supply's setting available current value
and digit length.
- 101 -