ODA EX Series, Брошюра и инструкция по эксплуатации

Страница: 14 / 113

EX Series Operating Manual
Power Cord Check
▌Your power supply is equipped with a 3-wire grounding type power cord; the third
conductor being the ground. The power supply is grounded only when the power-
line cord is plugged into an appropriate receptacle. Do not operate your power
supply without adequate cabinet ground connection.
Input AC Power Line Check
▌You can operate your power supply from a nominal 198~242 V single phase AC
power source at 47 to 63 Hz. AC100V, 110V, 115V, 230V input power is optional.
Refer to chapter "1-2. Accessories & Options"
▌In other to prevent the instrument severe damage from overload fuse is built-in ▌In other to prevent the instrument severe damage from overload, fuse is built in
(1U, 2U products) or braker(3U products) is installed rear side. If fuse also is
broken or braker is turned down repeatedly when power turns on, check the
input power line or broken braker and then call to nearest ODA Technologies A/S
Center
If products maximum output capacity is over 5KW, fuse will be replaced to Breaker.
<Figure 1-3>
- 14 -