ODA EX 100-12, Руководство пользователя

Страница: 79 / 94

FLOW?
This command is to confirm the power supply's CV(Constant Voltage), CC(Constant Current) state.
Return value
"CV" - Constant Voltage state.
"CC" - Constant Current state.
ex) FLOW?
return value "CV"
POL {P|N}
This command serves for specialized polarity power supply and changing polarity of output.
> P Convert to positive output state.
> N Convert to negative output state.
ex) POL P Convert to positive output state
POL?
This command serves for confirming the power supply's output polarity state.
Return value
"P" - positive output state.
"N" - negaitive output state.
ex) POL? return value "p"
6-5. Measure Commands
Measure commands measure the output voltage or current. MEASure commands acquire new data
before returning the reading. Also you don't need DVM(Digital Volt Meter) and ammeter
and you can measure voltage and current independently.
MEAS:VOLT?
These queries perform a measurement and return the DC output voltage in volts.
Return value
"voltage"
ex) meas:volt?
return value "11.00"
MEAS:CURR?
These queries perform a measurement and return the DC output current in amperes.
Return value
ex) meas:curr? return value "1.00"
MEAS:ALL?
These queries perform a measurement and return the DC output current in amperes and
DC output voltage in volts.
Return value
"voltage,current"
ex) meas:all? return value "10.00,1.00" // measured value 10V, 1A
- 80 -