ODA EX 100-12 Скачать руководство пользователя страница 24

Страница: 24 / 94

3. Front-Panel Operatin

If entering to each function of power supply, it returns or cancels to local mode when you press the IO/Local,

Protection, Store, Recall key or leave the power supply without any events after 5 seconds later.

The select and confirm key is it's own key. For examples, if you want to store current state, at first press

the "store" key and set the number what number you will store. After selected store number, press

the "store" key in order to finish the store. You can see the display "Done" in the LCD display.

Overview

1. Constant Voltage Operating (CV)

Explain about the operating constant voltage output mode.

2. Constant Current Operating (CC)

Explain about the operating constant current output mode.

3. Remote Voltage Sensing

Explain about the voltage sensing of DUT

4. Programming Over Voltage Protection (OVP)

Explain about the programming of over voltage protection

5. Programming Over Current Protection (OCP)

Explain about the programming of over current protection.

6. Programming Under Voltage Limit (UVL)

Explain about the programming of under voltage limit.

7. Programming Over Voltage Limit (OVL)

Explain about the programming of under voltage limit .

8. Programming Under Current Limit(UCL)

Explain about the programming of over voltage limit.

9. Programming Over Current Limit (OCL)

Explain about the programming of under current limit.

10. Key Lock

Explain about the locking and clearing of front panel operating

11. IO/Local

Explain about remote Interface setting/local mode changing and error message display.

12. Limit Display

Explain the confirm of voltage/current setting or real output value

13. Store

Explain the method of storing the power supply state in the 『user memory』chip

14. Recall

Explain the method of recalling the power supply state from the 『user memory』chip.

15. Output ON/OFF

Explain the power output on and off

16. Error Message Display

Explain the confirm the error of power supply

- 25 -

Содержание EX 100-12































































































Результаты поиска

Содержание EX 100-12

Отзывы:

ODA EX 100-12, Руководство пользователя, Страница: 24 / 94

Результаты поиска

Содержание EX 100-12

Отзывы: