NF KP3000GS, Инструкция по эксплуатации

Страница: 253 / 279

10. Specifications
PROGRAMMABLE AC/DC POWER SOURCE 234
10.13 Current Limiter
This controls the output voltage for the output current to be within the limiter setting value when
the peak value or RMS exceeds it. The output can be configured to be turned off when the limited
state continues over the specified time.
Peak current limiter
KP3000GS
Positive
current Setting Range
(Peak value)
*25
+15.0 A to +126.0 A / +7.5 A to +63.0 A
Factory default *26 +126.0 A / +63.0 A
Negative
current Setting Range
(Peak value)
*25

126.0 A to

15.0 A /

63.0 A to

7.5 A
Factory default *26 
126.0 A /

63.0 A
Resolution 0.1 A
Limiter operation Select whether to recover automatically (continuous) or turn the
output off when the limited state continues over the specified
time (1 s to 10 s, resolution 1 s).
Factory default setting is output OFF when the limit state
continues for 10 s.
*25: When you set the number of units by the power unit energization setting to 1, the setting range
becomes half.
*26: If you increased or decreased the number of units by the power unit energization setting, the
factory default setting corresponding to the capacity is used.
RMS current limiter
KP3000GS
Setting range
(effective value)
*27
1.5 A to 31.5 A / 1.5 A to 15.8 A
Factory default *28 31.5 A / 15.8 A
Resolution 0.1 A
Limiter operation Select whether to recover automatically (continuous) or turn the
output off when the limited state continues over the specified
time (1 s to 10 s, resolution 1 s).
Factory default setting is output OFF when the limit state
continues for 10 s.
*27: When you set the number of units by the power unit energization setting to 1, the setting range
becomes half.
*28: If you increased or decreased the number of units by the power unit energization setting, the
factory
default
setting corresponding to the capacity is used.