NF KP3000GS, Инструкция по эксплуатации

Страница: 48 / 279

3.3 Basic Key Operations
KP3000GS 29
3.3.2 Item Selection
You can move the cursor (highlighted icon) by using arrow keys or the jog. However, some items
cannot be selected depending on your model or system. These items are skipped when moving the
cursor. If you press the ENTER key, the item under the cursor is selected and run. If the item is a
menu, the menu screen, window, or selection box is displayed. If you press the CANCEL key, the
menu in the upper hierarchy is displayed without selection or execution of that item.
 Selection box
If the menu has numbers before its menu items as shown in Figure 3–7 (selection box), pressing the
corresponding number on the numeric keypad also selects and runs the item. You can also move the
cursor by using the shuttle.
If you select an item with
on the right, the selection box in the lower hierarchy menu is
displayed. In addition to the ENTER key, you can also use

arrow key to open the selection box of
that menu.
You cannot select grayed items in a selection box, which are different depending on your setting.
Figure 3-6 The Example of a Selection Box
 Data list box
When selecting data in the memory, the data list box shown in Figure 3–8 is displayed. To select a
data in a data list box, hover the cursor over the box by using the arrow keys or jog and press the
ENTER key. This operation enables the cursor to move over each data in the data list box. Hover the
cursor over the item you want to select by pressing the up or down arrow key or turning the jog or
shuttle and press the ENTER key.
Figure 3-7 The Example of a Data List Box