NF KP3000GS, Инструкция по эксплуатации

Страница: 35 / 279

2. Preparation before Use
PROGRAMMABLE AC/DC POWER SOURCE 16
 About outlet (optional)
The output terminals, the maximum voltage, the maximum current, and available output range are
listed for each type in Table 2-7.
Each outlet can provide up to 15 A of current. If a current exceeding 15 A flows, the circuit breaker
may operate to cut the output. When the circuit breaker operates, the button is pushed out forward.
Pushing in this button resets the breaker, and power can be provided from the outlet.
The outlet is dedicated to AC output. It can be used in the AC or ACDC mode. In the settings below,
the outlet is separated from the output by the internal relay of this product. However, only the Hi
terminal is separated.
 When in DC mode (DC-INT, DC-VCA)
 When in the 200 V range
Table 2-7 Outlet List
Type NEMA 5-15
Form
and Terminals
Lo Hi
Maximum Voltage 125 Vrms
Maximum Current 15 Arms
Available
Output Range
100 V range
 When using the outlet only and not using the outlet terminal, attach the resin-molded terminal
cover so that the folded part of it is directed to the lower side of the product, in order to avoid
contact with the output terminal.
 Use the outlet only for AC output without DC offset. Do not take DC output or AC output with
DC offset from the outlet.
 Use the outlet for 15 A or less output.
CAUTION
WARNING