NF KP3000GS, Инструкция по эксплуатации

Страница: 38 / 279

2.7 Simple Operation Check
KP3000GS 19
3. Turn on the switch of the distribution board, and then turn on the power switch of this product.
Check that all LEDs on the control panel illuminate for several seconds, and then turn off, and
that our logo mark appears on the LCD screen (see
3.2.3 ). If LAN interface is equipped, "LXI"
is displayed below the logo mark.
4. Except when you purchased a new product, refer to " 4.27 Restoring to the Factory Default
Setting (Reset)
" to initialize the product to factory defaults. The product will be reset, and
display the Continuous screen automatically.
5.
When you purchased a new product, the product will start and then display the Continuous
screen automatically.