NF KP3000GS, Инструкция по эксплуатации

Страница: 43 / 279

3. Basic Operation
PROGRAMMABLE AC/DC POWER SOURCE 24
Table 3-2 Component Name (Rear)
Number Name Description Refer to
1 External signal input
connector Used when controlling the voltage value
setting by the external signal (VCA),
when synchronizing the output frequency
with the external signal (SYNC), and
when outputting the amplified external
signal (EXT, ADD). 4.16 ,
4.18 ,
4.19
2 Monitor output connector Can observe waveforms of the output
voltage and output current when
connected to a unit such as oscilloscopes. 4.10
3 CONTROL I/O connector Used to control this product externally by
logic signal and non voltage contact. Also
it can obtain the state of this product with
a logic signal. 4.17
4 GPIB connector
or
LAN connector
GPIB or LAN communication interface.
Either one can be chosen when ordering.
6.1.3
,
6.1.4
5 RS232 connector RS232 communication interface.
6.1.2
6 USB connector USB communication interface. 6.1.1
7 Air outlet Air outlet for exhausting the heat. 2.2
8 Power input terminal Power input terminal. 2.4
9 Power input cable holder Used to fix the power input cable. 2.4
10 Output terminal Output terminal. 2.5
11 Output cable holder Used to fix the output cable. 2.5
12 Sensing input terminal Connect to the load end that is located in
the distance from the main unit to detect
its voltage.
4.11
13 Caster Caster with the freely movable
front-wheels and fixed rear-wheels. Can
be used to move this product in the
horizontal location. 2.3