NF KP3000GS, Инструкция по эксплуатации

Страница: 156 / 279

4.8 Using Memory Function
KP3000GS 137
 SEQ Recall
In the Memory View, select [SEQ Recall] to change to the Sequence Recall View as below, allowing
you to load the sequence. For the operation method, see
4.2.6 .
4.8.4 Simulation Memory
The user-created simulation can be saved in the Simulation Memory.
Both the internal and USB memories can be selected as the Simulation Memory. Creation and
saving of a simulation are performed using the simulation menu (see
4.3 ) or the control software in
the optional CD-ROM. For the content saved in the Simulation Memory, see Table 4-10.
The internal memory has 5 Simulation Memories from No. 1 to No. 5.
Table 4-10 Content Saved in Simulation Memory
Setting Item Factory default setting
Output range selection 100 V
Simulation Function Parameters
Refer to 4.27
 SIM Store
In the Memory View, select [SIM Store] to change to the Simulation Save View as below, allowing
you to save, clear, and rename the simulation. For the operation method, see
4.3.8 and 4.3.9 .