NEC Univerge SV9100, Руководство по оборудованию

Страница: 463 / 478

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 6 - 51
2. Answering Calls:

If you receive a call via PSTN during a conversation via
LAN, answer the call by completing the LAN call and
placing the handset back into the cradle. Change the
LAN/PSTN Change Switch to PSTN and then lift the
handset to answer the call. If you change the LAN/PSTN
Change Switch to the PSTN position while talking via
LAN, the LAN call is disconnected.

Other than receiving calls, no other terminal functions are
available.
3. Adjusting the Ring Volume
Use the Volume Control Switch located on the PSA-L adapter
to adjust through the three available volume levels.

Other than receiving calls, no other terminal functions are
available.
4. When Power is Restored
The IP keyset restarts and reconnects to the network LAN.
However, if you are on a PSTN call when the power is restored,
your conversation continues until the handset is placed in the
cradle. Once this occurs, the IP terminal restarts and
reconnects to the LAN.

Other than receiving calls, no other terminal functions are
available.
11.6 Gigabit Adapter (GBA-L UNIT)
The GBA-L UNIT enables IP telephones (DT730/DT750) to operate in a
Gigabit Ethernet environment. A single Gigabit Ethernet desktop drop
provides a 10/100Mbps to the IP telephone and a gigabit connection to a
personal computer. The Gigabit Adapter is installed on the bottom of the IP
telephone and offers a gigabit interface to the LAN side and PC port. The
Gigabit Adapter is powered by PoE or can operate off of local power.