manualshive.com logo in svg

NEC Express5800/53La, Руководство пользователя, Страница: 4 / 314

Поделиться
Скачать
NEC Express5800/53La Скачать руководство пользователя страница 4

SYMBOLS USED IN THIS MANUAL AND WARNING LABELS

Attentions

Indicates that improper use may cause an electric shock.

Indicates that improper use may cause fumes or fire.

Indicates that improper use may cause fingers to be caught.

Indicates that improper use may cause loss of eyesight due to laser beam.

Indicates that improper use may cause personal injury due to heat.

Indicates a general notice or warning that cannot be specifically identified.

Indicates that improper use may cause explosion.

Prohibited Actions

Indicates a general prohibited action that cannot be specifically identified.

Do not disassemble, repair, or modify the workstation. Otherwise, an electric shock or
fire may be caused.

Do not place the workstation near the fire. Otherwise, a fire may be caused.

Do not touch the workstation with wet hand. Otherwise, an electric shock may be
caused.
Do not use the workstation in the place where water or liquid may pour. Otherwise, an
electric shock or fire may be caused.
Do not touch the component specified by this symbol. Otherwise, an electric shock or
burn may be caused.

Mandatory Action

Unplug the power cord of the workstation. Otherwise, an electric shock or fire may be
caused.

Be sure to provide earthing. Otherwise, an electric shock or fire may be caused.

Indicates a mandatory action that cannot be specifically identified. Make sure to follow
the instruction.

Содержание Express5800/53La



























































































































































































































































































































Отзывы:

Нет отзывов