NEC Express5800/53La Скачать руководство пользователя страница 148 | Manualshive

Страница: 148 / 314

NEC Express5800/53La Скачать руководство пользователя страница 148

5-28 Installing the Operating System with Express Setup

IMPORTANT:

Windows 7 64-bit (x64) Edition

To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.

Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express works
300MB".

In a workgroup environment, assign a drive which has 25GB or
more free space.

In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory.
The size of debugging information (memory dump) to be taken
also changes due to adding memory. Verify the size of the empty
space in the debugging information (memory dump) write
destination drive.

Windows 7 32-bit (x86) Edition

To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.

Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express works
300MB"(In case the memory capacity is more than 2GB, a free
area of "2048+300MB" or more).

In a workgroup environment, assign a drive which has 25GB or
more free space.

In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to
adding memory.
Verify the size of the empty space in the debugging information
(memory dump) write destination drive.

7.

Click [Settings] in the [Performance] group box.

The [Performance Options] window appears.

8.

Click [Advanced] tab on the [Performance Options] window.

9.

Click [Change] on the [Virtual memory] group box.

«
...
146
147
148
149
150
...
»

Содержание Express5800/53La



























































































































































































































































































































Отзывы:

Нет отзывов