NEC Express5800/53La, Руководство пользователя, Страница: 150 / 314

5-30 Installing the Operating System with Express Setup
When the system is Windows XP
Follow the procedure below to specify.
1.
Click Start and select [Control Panel].
The [Control Panel] dialog box appears.
2.
Click [Performance and Maintenance] and then select [System].
The [System Properties] dialog box appears.
3.
Select [Advanced] tab.
4.
Click [Settings] on the [Startup and Recovery] group box.
5.
Modify [Dump file:] in the [Write debugging information] group box, and click [OK].
e.g. Write the debug information in D drive with the file name "MEMORY.DMP".
D:\MEMORY.DMP
IMPORTANT:
Windows XP Professional
„
To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
„
Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express works
12MB"(In case the memory capacity is more than 2GB, a free area
of "2048+12MB" or more).
„
In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory. The size of debugging
information (memory dump) to be taken also changes due to
adding memory. Verify the size of the empty space in the
debugging information (memory dump) write destination drive.
6.
Click [Settings] in the [Performance] group box.
The [Performance Options] window appears.
7.
Click [Advanced] tab on the [Performance Options] window.
8.
Click [Change] on the [Virtual memory] group box.
9.
Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than
the value of [Recommended] in the [Total paging file size for all drives], and click [Set].