NEC Express5800 140He, Руководство пользователя

Страница: 93 / 398

4-19
Security
Positioning the cursor to "Security" shows the following screen.
Selectable only when
User Password is
registered
Selectable only when
User Password is
registered
If you press Enter with the selection of either "Set Supervisor Password" or "Set User Password," such a screen as
shown below appears (the screen shown in the figure below appears when "Set Supervisor Password" is selected).
Specify the passwords on the dialog box. Enter each of the passwords with up to seven characters including
alphanumeric characters and symbols.
IMPORTANT:
„ Set the passwords only after operating system is installed.
„ If you forget the passwords, contact your service representative.
See the table below for the items.
Option Parameter Description Your Setting
Set User
Password Up to seven
alphanumeics Press Enter to display the user password input screen. For
this password, accessing to the SETUP menu is restricted.
Set Supervisor
Password Up to seven
alphanumeics Press Enter to display the supervisor password input screen.
This password enables all the SETUP menus to be accessed.
This setting can be done only on login with the password input
of "Supervisor" at start of SETUP.
Password on boot [Disabled]
Enabled Specify whether the passwords are entered or not on booting.
At first the supervisor password must be set. If the supervisor
password is set and this option is invalid, BIOS determines
that a user is booting.
Fixed disk boot
sector [Normal]
Write Protect Prevents data from being written to hard disks.
Secure Mode
Timer [Disabled]
1 minute
2 minutes
5 minutes Specify the period from no input from the keyboard or mouse
to the point at which the system enters into the secure mode.