NEC Express5800 140He, Руководство пользователя

Страница: 73 / 398

3-11
The POWER/SLEEP lamp on the front of the server comes on.
In a f ) begins.
The P
+
De
devic
If the
requi
Durin
the a
N
ew seconds, our logo appears on the screen and the Power On Self-Test (POST
OST runs automatically when you power on the server or reset it with a keyboard operation (
Ctrl
+
Alt
lete ). The POST runs diagnostics, initializes the server, sets interrupt vectors, detects installed peripheral
es, and boots the operating system (if installed). See Chapter 2 for detailed description on POST.
server halts before completing the POST, the POST emits a beep code indicating a fatal system error
ring immediate attention. (See Chapter 8, "Troubleshooting," for troubleshooting information.)
g memory test, the POST displays the amount of memory it was able to access and test. Depending on
mount of installed memory, it may take several minutes to complete the memory test.
OTE:
The factory-set is defined to hide the POST screen with our logo screen. You can
a
s lways change our logo screen to the POST screen by pressing Esc . To change the start-up
creen, use the BIOS setup utility, "SETUP." (See Chapter 4 for details.)
During the POST, y
system board or on a
Start the BIOS SETU SETUP
for the server, see Chapter 4. For the BIOS SETUP for the option board, refer to the manual that comes with the option
boa
ou will see the banner message to prompt you to launch the BIOS SETUP utility stored in ROM on
n installed option board.
P utility appropriate to your system environment to change the BIOS setup. For the BIOS
rd.