NEC Express5800 140He, Руководство пользователя

Страница: 208 / 398

7-6
The following menu appears when starting the server using the EXPRESSBUILDER.
Local console Remote console
5.
Select [Tools].
6.
Select [System Diagnostics].
The System Diagnostics starts and completes in approximately three minutes.
When the diagnosis completes, the display changes as shown in the figure below.
[Enter] Detail Information [ESC] Return to Enduser Menu
Test End
TeDoLi(TEst & Diagnosis On Linux) Ver001.00(Build020901.1.1m)
<System>
MEM Memory 16 count NormalEnd
CACHE Cache 49 count NormalEnd
<SCSI>
HDD_02:000 DK32DJ-36W
89 count NormalEnd
Start10:06:58 End 10:09:58 Pass 000:03:00 TestTime 000:03:00
Test End : NormalEnd 03 AbnormalEnd 00 ForceEnd 00
Guide line
Test window
Test result
Test windows title
Diagnosis tool title
Diagnosis tool title: shows a name of this diagnosis and version information.
Test windows title: shows the progress of diagnosis. When it completes, it shows "Test End"
Test Result: shows the information including time of start, end and progress, and result of the
diagnosis.
Guide line: shows a description of keys to navigate the window.
Test window: Move the cursor and press
Enter
to view the detail of the diagnosis.
If an error is detected during the System Diagnostics, the test result shows "Abnormal End" in red colour.
Move the cursor and press
Enter on the diagnosis where the error occurred. Take a note of the error message
showed, and contact your service representative.