NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 61 / 160

BenchMike Pro Instruction Handbook: Workholding Fixtures 3-9
3.3.3.2 Drawing of the Adjustable Centers mounted on the DRO Slide
Features of Adjustable V-Blocks include:
•
Pair of adjustable V-blocks that mate with the dovetail rail. V height is adjusted by locking knob. Millimeter
position scale.
•
V-block part size range: 2.286-50.8 mm (0.090-2.0 in.)
•
V’s are case-hardened with an included angle of 90°
•
When mounted as shown, the maximum part length that will fit in the V-blocks without hanging over is as
follows:
Slide A
18 in. Slide 361.95 mm (14.25 in.)
25 in. Slide 539.75 mm (21.25 in.)
32 in. Slide 717.55 mm (28.25 in.)
•
Adjustable V-Blocks, mounted in the DRO Slide, will support a maximum weight equivalent to a 2-inch
steel bar of length A (table above).