NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 141 / 160

BenchMike Pro Instruction Handbook: Remote Setup 6-19
6.3.2 Getting Help
6.3.2.1 Help Commands: HELP
The following command lists all available help commands.
HELP
Request a listing of all supported PURL commands.
Examples:
HELP
6.3.3 Performing Measurements
6.3.3.1 Performing Measurements: MEAS
The MEASure command allows you to perform several operations related to measurements by BenchMike Pro.
MEAS.CLEARALL.NOW
This command will clear all data. Example:
MEAS.CLEARALL.NOW
MEAS.CLEARLATCHED.NOW
This command will clear all latched alarms. Example:
MEAS.CLEARLATCHED.NOW
MEAS.CLEARLAST.NOW
This command will clear the last measured data. Ex-
ample:
MEAS.CLEARLAST.NOW
MEAS.DATA
Enter a variable name followed by the equals sign to
set the value. Example:
MEAS.DATA:F1.NOMINAL=0.50
MEAS.DATA?F1.NOMINAL
MEAS.DEFINE.FORMAT
This command allows you to add a character string
to the .MEAS.LAST.MEAS command.
Example:
MEAS.DEFINE.FORMAT?
MEAS.DEFINE.FORMAT:New Product= [F1.SIZE]
Avg=[F1.AVERAGE]
MEAS.LAST.MEAS
Request that the last, good formatted measurement
be transmitted. Use MEAS.DEFINE.FORMAT to change
or view the format of this data. Example:
MEAS.LAST.MEAS?
MEAS.LISTVARS
Returns a CR/LF separated list of all defined varia-
bles and their value. Note that some will not contain