NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 121 / 160

BenchMike Pro Instruction Handbook: Advanced Capabilities 5-9
If you select the Custom Wizard , several pages will be displayed,
each allowing you to select settings for your measurement. Part
Wizard can be used with products of less than 58 segments. See
also
Measuring a Product .
If you wish to create a custom measurement using a sample part,
select
Measure Part Sample . The Wizard will step you through
the process of selecting the desired segments based on a sample
which you place in the measurement area of your BenchMike Pro.
If you wish to enter the definition of your Custom measurement
manually , these screens will appear.
With a Custom measurement, you can direct the BenchMike Pro
to measure and display either the dark segments (regions where
laser light did
not reach the BenchMike Pro’s receiver), light seg-
ments (regions where laser light did reach the receiver) or both.
If your product is transparent, you can change the BenchMike
Pro’s logic to ensure that light bleeding through the product does
not adversely affect measurements. If your product is not trans-
parent, it is recommended that you select the Non-Transparent
option.