NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 145 / 160

BenchMike Pro Instruction Handbook: Remote Setup 6-23
SYST.SKILL
Request PURL version. Example:
SYST.SKILL?
SYST.STAT.SCAN
This command will return the status of the laser
gauge. There are five characters to indicate the
status.
E
Extra segments
M Missing part
L Low power
O Scan overrun
N No scan
If the condition exists, a character will be returned
in that location. If the condition does not exist, the
character will be blank (character space). Example:
SYST.STAT.SCAN?
SYST.STAT.MEAS
This command will return the current measurement
status. There are seven characters.
S
Scan error
E End of part
M Measuring now
R Upper reject reached
R Lower reject reached
W Upper warning reached
W Lower warning reached
If the condition exists, a character will be returned
in that location. If the condition does not exist, the
character will be blank (character space). Example:
SYST.STAT.MEAS?
SYST.VER
Request the application firmware version. Example:
SYST.VER?
SYST.WIRED.ADDRESS
Request the IP address and Netmask of the unit.
Example:
SYST.WIRED.ADDRESS?