NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 64 / 160

4-2 BenchMike Pro Instruction Handbook: Setup
Only four measurement items are displayed at one time, but
you can change the order and type of items by simply
touching one of the items in the center of the display if you
have
Advanced Screen options are enabled.
If you wish one measurement item to be magnified on the
screen to be visible from a distance, select Magnify from the
menu, as shown. Touch the screen again to restore the
screen to its previous display.
NOTE: Programmable functions identified by the characters
Fxx, where xx is a number from 01 to 32. The Feature num-
ber appears between the Measurement Type icon and the Library block.
To indicate that product measurements have exceeded Warning or Reject limits, a colored bar will appear behind
the out-of-limits measurement if the limits have been defined and measurements are being taken. The screens
above show examples of measurements within all limits (green bar), measurements exceeding Reject limits (red
bar), and measurements exceeding Warning limits (yellow bar), respectively.
The bar along the bottom of the touch screen contains several icons: Setup , Quick Info , Status , Units , and
Help . Touch the Setup icon to access all the setup menus and parameters needed to alter the way data is pro-
cessed and displayed. The Date/Time block allows you to define the current time and date.
NOTE: For more information about limits and warnings, see the Setup section, under Warning Tolerances.
Green bar Red bar
Yellow bar