NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 118 / 160

5-6 BenchMike Pro Instruction Handbook: Advanced Capabilities
pow pow(num,pow) Raises num to the power “pow”
radians radians(angle) Converts degrees to radians.
sin sin(num) Sine of given angle; num is in radians
sinh sinh(num) Hyperbolic sine of given angle, num.
sqrt sqrt(num) Square root of num
tan tan(num) Tangent of given angle; num is in radians
tanh tanh(num) Hyperbolic tangent of given angle, num.
5.2 Advanced Screen Capabilities
The BenchMike Pro also has advanced screen capabilities. These capabilities allow you to display up to 32
data items in the data display area of the screen. When more than four data items are selected for display,
a scroll bar appears on the right of the screen so that you can move through the selected items.
When tolerance checking has been enabled for a displayed data item, the data item will be automatically scrolled
into view if the condition(s) defined by Display Scrolling are detected. These conditions are: Warning Tolerance
only, Reject Tolerance only, Warning or Reject Tolerance, and Never.
5.2.1 Accessing Advanced Capabilities
Follow these steps to access these advanced capabilities.
1. Touch the Status icon (shows OK, Err, or !) from the main screen.
2. Touch the About button.
3. Touch the Configure button.
4. Enter the password. The default password is 000000 .
5. Select the Screen tab. Make sure the Advanced
Screen Operation box is checked to enable these ca-
pabilities. Click OK.