NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 140 / 160

6-18 BenchMike Pro Instruction Handbook: Remote Setup
Options are: NONE, SPACE, COMMA, SEMICOLON, CR, LF,
CR/LF, and TAB.
Examples:
CONF.SER.FORMAT.SEP:NONE
CONF.SER.FORMAT.SEP?
CONF.SER.FORMAT.SIGN
Turn the inclusion of a +/- sign in front of a number ON
or OFF. Examples:
CONF.SER.FORMAT.SIGN:ON
CONF.SER.FORMAT.SIGN:OFF
CONF.SER.FORMAT.TERM
Request or specify the termination character for serial da-
ta. Options are: NONE, CR, LF, CR/LF, and ETX. Examples:
CONF.SER.FORMAT.TERM:NONE
CONF.SER.FORMAT.TERM?.CONF.SER.PAR
CONF.SER.FORMAT.TIME
Turns the date/time stamp for serial data ON or OFF. Ex-
amples:
CONF.SER.FORMAT.TIME:ON
CONF.SER.FORMAT.TIME?
CONF.SER.PAR
Request or specify the parity of the selected serial port.
Odd, even, and no parity are available. Examples:
CONF.SER.PAR?
CONF.SER.PAR:E
CONF.SER.PAR:O
CONF.SER.PAR:N
CONF.SER.PORT
Select a serial port number for setup and/or query. This
value can be set to 1. Examples:
CONF.SER.PORT:1
CONF.SER.PORT?
CONF.SER.SBITS
Request or specify the stop bits of the selected serial port.
This value can be either 1 or 2. Examples:
CONF.SER.SBITS:1
CONF.SER.SBITS?
IMPORTANT NOTE: Be careful to specify the correct baud rate when configuring the serial port. If you incorrectly
define the baud rate, you will be unable to communicate with the BenchMike Pro until this is corrected.