NDC BenchMike Pro 2025, Инструкция по эксплуатации

Страница: 78 / 160

4-16 BenchMike Pro Instruction Handbook: Setup
4.8 Settings Functions
Touch Settings from the Setup menu to display the menu
shown. This menu contains settings that are unique to each
library.
NOTE: Settings commands are unique to each library but are
common to all features within a library.
To access settings for printed reports, select Setup , then Settings , and then Reports . These pages allow you to
define settings for report output via a dot matrix or inkjet printer.
There are three tabs under Report Setup . From the Reports
tab, you can specify the type of report to be generated.
NOTE: Fixture Sample Reports and Fixture Part Reports are
only available when you are using a fixture.
There are four types of reports available from this menu:
Sample Report
Batch Report
Fixture Sample Report
Fixture Batch Report
Use this Title tab to enter the desired title of your data report.
From the Output tab, you can set up your external printer for
report printing. Specifically, you can define the output port to
be used, and you can enable/disable the report form feed
and report Header/Footer functions.
NOTE: You can select the Serial 1 Port, Serial USB, CUPS
Printer, or Ethernet Port 8003 for report printout.