© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
6
MRJ04410
1-2-5.
BACKUP BATTERY
Since backup of an internal clock is using the ultra capacitor, there is no necessity for exchange.
Backup time is about three weeks.
A time display may be
[----.--.-- --:--]
when not turning on electricity the time of the power activation after
purchase, and for a long period of time.
In such a case, please set up the right time on F2 screen. (Reference 2-4-3. )
1-2-6.
DISPLAY LIMITED INDICATION PROTECTION
DigiPackⅡ has two different level of setup display. These two different displays are divided to operation
level (F1 to F5) and setting level (F1+Set to F5+Set). And can be distinguish which level display showing
now from background color. Operation level indicate background color as Cyan” ” and setup displays
are indicated as Yellow “ ”.
If set to level “low”, operate can be call display only operation level display. And if set to high level, can be
call all display both operation and setup display.
Change Level
At any display press “F5” and “Set” key then hold 5 sec. (to see the “
Figure 1-5
” for location of switch)
The level alternately changes “Operation”
Ù
“Setup”. If you want change back to old level, do again press
“F5” and “Set” key and hold 5 sec.
This level change does not indicate any notice on display. Please check the level was correctly
changes or not by press F1+Set, if the level “Low” should not goes to setup display
Figure 1-5 Limit level set.
F5
Set
