© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
62
MRJ04410
“Please edit file name Yes/No”
If you select “Yes” Reference
Figure 2-22
and follow the
instructions below….
The LCD display changes to the Edit screen (
Figure 2-22
)
and prompts ‘File name”. Use the Entry Knob to name the
file (32 characters maximum). The Entry Knob moves the
display cursor from character to character. The Set Key
enters the individual characters of the file name.
Special Characters
The “←” and “→” symbols are used to move the display
cursor within the file name.
The last character in the list inserts a blank space in the
name.
The “END” character is necessary for entry completion.
“END” must be inserted at the end of editing or the new file
will not be renamed. (If not change the name, skip to
Figure
2-19
)
The LCD display changes to the File No. select screen
(
Figure 2-23
) and prompts ‘File No.” Move to the desired
file number by using the Entry Knob (selects in increments
of 1) and the Cursor Key (selects in increments of 20).
Press Set to enter.
After select file number, the LCD display changes to a de-
scription of the entry data (
Figure 2-19 – Figure 2-21
) with
the “Quit or Save or Next” prompt displayed. If you select
“Save”, the DigiPackⅡsaves the data and displays it in F1
Profile Mode. If you select “Quit”, you are returned to the
first screen of the F3 File Mode and no data is saved.
Figure 2-23 Change File Number
Figure 2-22 Edit File name
