© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
17
MRJ04410
1-5-15.
CONTAMINATION CONTROL
Long term trouble free operation with a minimum of unplanned
down time and adequate oil contamination control are linked very
closely. It is very important to maintain adequate oil cleanliness.
The addition of a system contamination control filter will control
oil contamination levels at minimum expense.
The filter should be located such that the flow through the filter is
relatively constant and at a low pressure. The junction of the
return lines from the tooling actuator and the system relief valve
is a suitable location.
Figure 1-16 Flow Pressure Filter
