© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
59
MRJ04410
Start slope
The slope or velocity of motion to Point 1 position, when the Start Slope signal is given. Setting range is 0.1
to 999.9%/sec. Valid only when the “Filling” status is indicated. See
Figure 1-29
and
Figure 2-16
.
Time set
A time setup of an internal timer is performed.
When there is no time correctly by an initial state or no long-term turning on electricity, time is set up on
this screen.
Date
A date is inputted.
Time
Time is set up.
Set
After inputting a date and time, a timer is set up by set and a count is started.
