© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
7
MRJ04410
DigiPackⅡ Manual, Installation and Maintenance
1-3.
DigiPackⅡ SPECIFICATION
Model Number:
J141-214A DigiPackⅡ.
Function:
100 Point Single Head Blow Molding Parison Programmer.
Application:
Accumulator Based or Continuous Extrusion Blow Molding Machines
may be selected.
Profile Points:
100 points. And Straight or Spline interpolation can be selected.
Tooling Type:
Divergent or convergent die gap tooling types can be selected.
Tooling Position Control:
Digital closed loop servo system with a 0.5m sec update time.
Tooling Position Monitor:
From Tooling Position Actuator’s DCDT
±
10 VDC.
From Accumulator Potentiometer 0 to 10 VDC FS.
Programming Inputs:
By entry knob and front panel switches.
Display:
Color Display (LCD). 480(W) x 640 (H) pixels.
English/Japanese/Chinese language selected by Parameter at Setup
screen.
Memory:
100 program profile patterns can be stored in a Flash RAM. And able
to saved in to SD card. *SD card supported standard type and up to
32GByte (SDHC) data size available.
Marker:
A marker output signal can be set maximum 10 program point.
Other Functions:
Shot Size, Delay, Cushion (for accumulator machines only), die gap,
data saving, profile curve adjustment (Weight and Range H/L), ad-
justment of the tooling actuator stroke and the accumulator position
transducer, battery backup for the system timer.
Output to Servovalve:
MFB type: ± 10, 20, 50, 100 mA or EFB type: ± 10 VDC
Servovalve Monitor:
± 100% Spool Stroke equals 4-20mA
I/O for Accumulator:
0 to 10 VDC transducer output and 10 V DC transducer excitation.
I/O for Tooling Position:
± 10 VDC DCDT output and ± 10 V DC DCDT excitation.
Common External Input:
Photo Coupler Isolated
Customer Supplied 15 to 24 Vdc @ 10 mA /Channel
24 VDC External Outputs:
Photo MOS Relay
Customer Supplied 15 to 24 Vdc @
100mA /Channel Max.
End of Extrusion/Filling Relay Contacts:
250Vac @ 1 A/channel MAX.
Communication:
Data transfer with host computer by RS422 and Ethernet
Power Requirements:
24 VDC 0.5A min (MAX 3.0A depend on Servovalve Power required)
No ripple requirement : Max +-10 %
Temperature/Humidity:
0 to 45ºC within 95% relative humidity
IP rating
Front side = IP20, Rear side = IP30
Dimensions:
288 (W) x 240 (H) x 80 (D) mm
Weight:
3.2 kg
