© MOOG 2010
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
61
MRJ04410
“Please edit file name Yes/No”
If you select “No” then follow the instructions below..
The LCD display (
Figure 2-19 – Figure 2-21
) shows the description of the file data, press Set at “Next” to
see each display one by one.
To save the file, move cursor to “Save” with Entry Knob and press Set Key.
If you select “Save”, the DigiPackⅡsaves the data in the Flash RAM (or to the SD card if you selected
Save SD) and displays the save data in the Profile mode. (F1: Profile).
If you select “Quit” the first screen of the F3 File mode is displayed and no data is saved.
The data will automatically be saved in the “FILE NO….” file shown in the LCD display even if data
is already stored there. In this case, the previously stored data will be lost.
Figure 2-19 File Description Data–Page 1
Figure 2-20 File Description Data-Page 2
Figure 2-21 File Description Data-Page 3
