4. Configuring Your Terminal
Use these parameters to configure the lines of text you want to appear at the bottom of your receipts:
All the parameters are blank by default.
4.11.3
Enable Large Amount Printing
Use the
parameter to enable/disable printing of double-wide characters for amount lines and
the Sequence number and Approval Code lines (see
Finding Sequence and Orig Auth Numbers
). The feature is
enabled by default.
4.11.4
Enable Printing of Customer Copies
Use the
parameter to enable/disable and configure printing of Customer copies of receipts from
non-chip transactions. By default, the terminal is configured to print Customer copies automatically.
4.11.5
Enable Re-Printing of Merchant Copies
Use the
parameter to enable/disable and configure re-printing of Merchant copies of
receipts in addition to Customer copies. Re-printing of Merchant copies is disabled by default.
4.11.6
Configure the Print Prompt Beep Delay
Use the
parameter to configure the number of seconds you want the terminal to wait before
printing the Cardholder copy after beeping and displaying the "Tear Receipt; Press OK key" prompt.
For receipt-related procedures, see
Finding Sequence and Orig Auth Numbers
and
4.12
Configuring Tip Processing
Note: Do not enable Tip Processing if you are using
4.12.1
Basic Tip Processing
To enable Basic Tip Processing:
1.
On - Prompt
.
2.
0
.
Note: Tip Processing is skipped on
78
Moneris Vx810 Duet Operating Manual