4. Configuring Your Terminal
4.8
Configuring the Modular Contactless Reader
If you have an optional modular contactless reader for use with your terminal or external PINpad, note the
following:
Note: If you wish to use the modular contactless reader, it needs to be enabled on the
Moneris host. Once enabled on the host, you need to
4.9
Disabling Manual Entry on Credit Cards
gives merchants the ability to enable or disable manual entry of specific credit
card types. By default all credit card types are set to
Yes
, which means they are able to be manually keyed in on
the terminal.
Note: This procedure is only applicable if the master setting (Manual Entry) is set to
menu. If the Manual Entry is set to 'On' or 'Off', it
removes the necessity to perform this set of instructions.
on specific card types (while leaving others enabled), follow
the instructions below:
1.
, select
DEBIT & CREDIT
.
The message "Activating App..." appears followed by the
2.
Press the green
OK
key to enter the CONFIGURATION menu.
3.
Select
SETUP
.
4.
When prompted, enter the
OK
key.
5.
Scroll down to select
Edit Cards
.
6.
In the Edit Cards screen, select
Next
to display card type that you wish to change.
7.
Select
Slct
below to determine which card type to select.
8.
Select
Next
until "Manual Entry" is the displayed option.
9.
Select
Edit
to edit the card type.
10.
Select
No
to disable manual entry for this card type.
11.
Select
Exit
then select
OK
to save the changes.
12.
Repeat steps 7 - 11 again as necessary to disable manual entry of specific card types.
Once manual entry on certain card types has been prevented, a clerk or cardholder who tries to
will be presented with a prompt that says "
Swipe Only
". The user is only allowed to swipe,
insert or tap their credit card.
If manual entry on a card type is left enabled (the default) and the
Password Protection on Manual Card Entry
feature is also enabled, the user will be prompted for the
Moneris Vx810 Duet Operating Manual
75