2. Features and Procedures
To power up (or turn on) the terminal:
1.
Plug the power adaptor cable into the power port ( ) on the
2.
Plug the other end of the power cable into a power source e.g. a wall jack or a power bar.
The terminal is ready when the
Note: For power up instructions when an external PINpad is connected to the terminal,
2.4.3
Powering Down the Vx810 Duet
The Moneris Vx810 Duet terminal does not have an ON/OFF switch.
To power down (or turn off) the terminal, simply unplug the power cable from the power source, e.g. the wall
jack or a power bar.
The screen will go blank and the backlight will turn off.
Note: See
2.4.4
Loading Paper in the Integrated Printer
Paper well open and empty Paper well open with roll of paper
To load a paper roll into the terminal:
1.
Open the paper well at the.
2.
Remove the paper roll that is in the paper well.
3.
Prepare the new paper roll: Loosen the glued leading edge of paper and unwind the paper roll past any glue
residue on the paper, or remove the protective strip.
4.
Place the new paper roll into the paper well with the loose end unrolling from the bottom of the roll
towards the front of the base.
5.
Pull the loose end of the paper towards the front of the base at least one inch (2.2 cm) past the metal teeth at
the front of the paper well. Make sure any glue residue on the paper role is past the cutting teeth of the
printer.
6.
Close the printer lid and press firmly on it to ensure that it is securely latched.
46
Moneris Vx810 Duet Operating Manual
