3. The Moneris Vx810 Hardware
2.
Plug the RS232 connector into the RS232 port on the back of the terminal base. Plug the power connector
into the power port ( ) on the back of the base in the unlock position. Turn the plug counter-clockwise to
put it in the lock position.
3.
Locate the power cable and the power adaptor cable. Plug the power cable into the power adaptor cable.
Plug the other end of the power adaptor cable into the power port box in the middle of the PINpad power
cable. Insert the connector at a right angle to the box then turn it counter-clockwise to lock it in place.
4.
Plug the other end of the power cable into a power source.
Recommendations: Always plug the power cable into the power source last to avoid
power surges. Use a power bar with surge protection where possible.
IMPORTANT: You must use the exact power adaptor and cables provided by Moneris Solutions to
work with the Moneris Vx810 terminal and PINpad. Failure to do so may affect the operability of
or cause damage to the equipment.
5.
The terminal is ready when the
appears and the external PINpad displays the
"WELCOME/BONJOUR" screen.
3.9.2
Transactions with the External PINpad
1.
Begin the transaction on the Vx810 Duet terminal.
2.
When "Swipe Card:" appears on the terminal, pass the PINpad to the customer for card entry (see
3.
When "Wait for PINpad" appears on the terminal, the customer follows the prompts on the PINpad.
62
Moneris Vx810 Duet Operating Manual
